Mortaring: Laying natural stone slabs in a mortar bed

BRICK LAYING, PASTERING, SCREED LAYING

With the Collomix WK paddle
mix difficult to handle, tough materials
correctly

PADDLE COLLOMIX WK

for heavy mixtures

Mortars, Plaster and Cement Screed

Original Collomix-Paddle

mixes strongly

from bottom to top

Lenght 590 mm

available in Ø 120 mm and Ø 135 mm

With HEXAFIX® connection
for paddle exchange with only one click -
without tools!

DID YOU KNOWß

The right specialized paddle is important, to ensure that your mixture is flawless and that no material defects or deficiencies occur later. Here you will find valuable professional tips for mixing of particularly tough materials:

MORTAR

This compact, sticky material holds stone on stone and is used, for example, in wall construction or for foundations. It consists hydrated lime or cement, sand and water.
  • The easiest way: pre-baged universal mortar. This powder is simply added to the amount of water specified on the package.
  • Mix the mortar in a large plastic bucket or tub. Mix everything quickly and homogeneously using the MIXBRO and the Collomix® Paddle WK.
  • Attention: ready-mixed mortar sets quickly and is then unusable. Therefore, only mix as much as is needed at the time! If it is too little: a new bucket can be mixed in a flash with the MIXBRO.

PLASTER

seals interior and exterior walls and thus professionally prepares them for the next layer of paint e.g. for paint, wallpaper or insulation.
  • Plaster does not hold equally well on all substrates. In the case of particularly smooth surfaces (e.g. joists steel beams) or highly absorbent plaster substrates (e.g. aerated concrete), it may be necessary to apply a spray coat or a bonding bridge coat may be necessary.
  • The MIXBRO and the Collomix® WK paddle prevent the formation of lumps during mixing. After the first mixing, the plaster should be allowed to mature for a short time and then mixed up again.
  • If plaster is too dry or too wet when applied, cracks can appear in it after a short time. Therefore, always mix only a small amount (15 - 20 l), so that you can process your material without time pressure. Be sure to use the correct amount of water, if you use a bag of plaster only proportionally!

HERE YOU WILL FIND THE RIGHT PADDLE FOR:

creamy material

Tile adhesive, Filler or
Flooring compounds

TO PADDLE KR

liquid material

Paints, Primers
or Coatings

TO PADDLE FM

Have you learned everything about your material? 
Now you need the right mixer!

TO THE MIXERS

HERE YOU WILL FIND THE MIXERS AND PADDLES: