Collomix stirrer FM, the classic paint mixer - mix paints and coatings without splashing. Mixing effect top to bottom

PAINTING, PRIMING, COATING

With the Collomix FM paddle
mix liquid materials
correctly

PADDLE TYPE COLLOMIX FM

for liquid materials:

Paint, Primers or Coatings

Original Collomix-Paddle

mixes without splashing 

from top to bottom

Lenght 590 mm

available in Ø 120 mm

With HEXAFIX® connection
for paddle exchange with only one click -
without tools!

DIDI YOU KNOW?

The right specialized paddle is important, to ensure that your mixture is flawless and that no material defects or deficiencies occur later. Here you will find valuable professional tips for mixing of liquid materials:

PAINTS

The right wall color adds the finishing touch to a room. Recommendation for the desired shade: mix only solid and tinting paint or pigments from the same manufacturer.
  • Before mixing, calculate the required amount of paint generously. Note here: One layer of paint does not always cover completely.
  • Mix your required amount at once and use a sufficiently large container. Slowly move the MIXBRO with the MIXBRO with the Collomix® Paddle FM from the bottom to the top several times so that the color pigments are evenly distributed.
  • Make a note of the proportions of paint used in case you need the same shade again - for touch-up work, for example. You can store leftover mixed paint in an airtight container and use it even months later.

COATINGS

Liquid coatings are often offered on a synthetic resin basis. Once rolled out, they seal surfaces and give them a pleasing appearance.
  • For the coating to adhere to the substrate, it must be completely clean and dry. It should not have any major damage or crumbling spots.
  • With the MIXBRO, you slowly guide the Collomix® Paddle FM from the bottom to the top several times so that both components mix together completely and without streaks.
  • Apply the coating evenly and generously with a roller using the cross processing method. Epoxy resin mixtures cure in a short time. Therefore, only work into the material while it is still wet to avoid joints and edges.

HERE YOU WILL FIND THE RIGHT PADDLE FOR:

heavy material

Mortar, Plaster or Cement Screed

TO PADDLE COLLOMIX WK

creamy material

Tile adhesive, Filler or Levelling Compounds

TO PADDLE COLLOMIX KR

Have you learned everything about your material? 
Now you need the right mixer!

HERE YOU WILL FIND THE MIXERS AND PADDLES: